Straight Belt (Pictured Above)

This ranger style belt measures 2-1/2" in width and is constructed of two
pieces of 8-9 oz. leather laminated together for a total thickness of 5/16".
Standard 25 loops are sewn on the face prior to the belt being laminated.
The belt is then stitched around the entire outside edge. It comes with a
1-1/2" nickel center bar buckle. This belt can be ordered with tooling and
in wider widths.

Money Belt (Pictured Above)

This belt is 3" wide and patterned after money belts used in the 1880's. It
is made by folding a 6" wide piece of leather which is then sewn on the top
edge and both ends forming a hollow center so coins can be inserted in
the slot at the buckle end. This belt is usually used with the loop style
holster for that "Old West" look.

Drop Belt (Not Pictured - See Drop Holster)

This style belt is constructed of two pieces of 8-9 oz. leather that's
laminated together for a total thickness of 5/16". It rides low on
the hip and is precut to conform to the hip. The belt is normally used
with a drop holster.

Double Drop Belt (Not Pictured)

This belt is constructed of 8-9 oz. leather laminated together for a total
thickness of 5/16". The belt rides low on the hip and is precut to conform
to the hip. This belt is the same as the Drop Belt, but is designed to
accommodate two holsters.

HOW TO MEASURE FOR A BELT

Do not use your pants size!

Straight Belt (You'll need to use measurement A)

Drop Belt (You'll need to use measurements A & B)

Double Drop Belt (You'll need to use measurements A & C)

Measurement A: Measure around your midsection where you are going to wear
the belt. This measurement will be the center hole on the belt. You'll have
an up or down leeway of 2".

Measurement B: Measure your complete midsection. Then measure from the center
of your pants around the back to the pants seam (3/4 around the body). This
centers the belt buckle and places the holster on the center of your leg.

Measurement C: Measure from the center of your pants seam on the left side
to the center of your pants seam on the right side.